中文
English
Features
1.The controller can collect the traffic data of each traffic models, the number of shaft, the single axle load, axial group weight, the gross vehicle weight and the distance between shaft, total wheelbase, the length of the car, speed, driving direction, driving time and other traffic data, and have higher ability to recognize the vehicles move; And it has higher recognition ability for vehicle movement
2. The controller have the function of automatic recovery if power outages, the recovery time is less than 10 seconds, and the failure information can be sent to the outside through the information interface when the fault occurs;
3. Easy to install and debug, the failure rate is low
4.With the function of data caching, the driving data can be stored for about half a year.
5.Multiple finishing modes: earth inductor coil, light screen, etc
Technical parameters
1. Maximum scale: 40T; Minimum weight: 0.5 T;
2. Dividing value: d=50kg
3. The dynamic weighing accuracy of the whole vehicle: 0.3km/h ~ 20km/h : ±2.5% 20km/h ~ 50km/h:±5%
4. Overload ability: >150%FS
5. Accuracy of flow detection: >98%
6. Speed error:±2km/h
7. wheelbase error: <2%;
8, working temperature: -20 ℃ ~ +60 ℃;
9, relative humidity: ≤ 90%
10, working voltage: DC5V / 10A, DC24V / 3A;
11, communication interface: RS232, NET;
12, the number of channels: 4CH
13, the largest management lane: 1 lane;
14, Weighing speed range: 0.3km / h ~ 50km / h
15, Vehicle separation accuracy: ≥99%;
16, Model recognition rate: > 98%;
17, Product size: 145*253*76(mm)